Torrevieja, Orihuela Costa, Guardamar del Segura, Rojales, Ciudad Quesada, San Miguel de Salinas, Los Montesinos, Pilar de la Horadada, La Zenia, Santa Pola, Elche, Almoradí, Albatera, Crevillente, Aspe, Dolores, Catral. For significant renovations, we arrange a prior visit with a detailed itemised quote, free of charge. Call us, write to us via WhatsApp, or request your quote online — we respond in less than 10 minutes during business hours. Yes, free and without obligation. Prior visit to measure and check the condition of the walls. Detailed itemised quote within 24-48 hours.

Yes, with chemical barrier injection methods and waterproofing mortars. We guarantee the treatment for 5 years. Painting over without treating the humidity never works, it always returns. Improperly installed articulated mounts are the primary cause of falling TVs in homes. The articulated arm multiplies the leverage effect when the TV is tilted or rotated. If the wall anchor is marginal, the actual weight exerted on the fixing can triple at maximum extension. That's why we always look for metal studs behind the plasterboard or a concrete pillar. We never anchor an articulated arm solely to plasterboard or hollow brick. The optimal screen centre height is 1.10-1.20 metres from the floor when viewed sitting on a sofa. For walkways or kitchens, 1.40-1.60 m. We measure it before marking.

Perforated brick is the most common material for interior partitions and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the rawlplug can fall into the inner chamber of the brick if it enters between two walls. To prevent this, we use special rawlplugs that expand inside the cavity. For medium loads, it works well. For heavy loads, it's better to find the nearest pillar. Plasterboard (laminated gypsum board) is the modern material for recent construction ceilings and partitions. It is very fragile without the correct rawlplug. For light loads up to 5 kilos, a toggle anchor is sufficient. For medium loads, there are metal molly-type plasterboard rawlplugs that expand behind the board. For heavy loads like large TVs, the supporting metal studwork behind the plasterboard must be located with a detector, and the screw driven into the stud. Specific rawlplugs and screws according to material, appropriate drill bit, and dust extraction.

The price for plasterboard ceilings in L'Hospitalet de Llobregat usually ranges between €176 and €2225. The final figure depends on the condition of the property, the materials, and the working time. We always give a fixed quote before starting. If the fixing gives way, we return to reinforce it at no cost. Rawlplugs calculated with a safety margin. Approximately 60-90 minutes including composition, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch.