How we work
For areas of very intensive use (entrances, hallways, continuously trafficked stairs), we recommend not using floating laminate flooring because its concentrated intensive use deteriorates the top layer faster than in residential areas. For those areas, porcelain stoneware or natural stone will last much longer. Solid wood parquet is the traditional option. Each board is 100 percent natural solid wood, typically oak, ash, or walnut. Much more expensive to buy and install, but it gives a unique character to the room because each board has a distinct natural grain. Its great advantage is indefinite durability. If it wears or gets damaged, it can be sanded and re-varnished multiple times throughout its life. This is what was used in old high-end flats and what we recommend for premium home renovations where the budget allows. Preparing the subfloor is the most critical step. Floating laminate flooring requires a subfloor with a maximum deviation of 3 mm over a 2-meter straightedge. If the subfloor has greater deviations, it must be levelled with self-levelling mortar before starting. Without this levelling, the tongue-and-groove joints will gradually separate, and visible gaps will appear between boards after a few months of use.
