Call us, message us on WhatsApp, or request your quote online — we'll respond within 10 minutes during business hours. The process is laborious. We apply a thick levelling compound over the artex and let it partially dry. We then sand with an orbital sander until the surface is completely smooth. We apply a sealing primer and two coats of emulsion paint. The dust generated during sanding is considerable. We cover the entire room with plastic sheeting before starting and vacuum thoroughly upon completion. A standard 15 m² room, smoothed and painted, takes 2-3 days of work. Solid wood parquet is the traditional option. Each plank is 100 percent solid natural wood, typically oak, ash, or walnut. Much more expensive to purchase and install, but it gives unique character to the room because each plank has a distinct natural grain. Its great advantage is its indefinite durability. If it wears down or gets damaged, it can be sanded and varnished again several times throughout its life. This is what was installed in old high-end flats and what we recommend for premium home renovations where the budget allows.

Yes, we organise by rooms so you have unaffected areas. Low-odour water-based enamels allow you to live at home during the work. The second critical step is the moisture barrier. On ground floors or over damp subfloors, a polyethylene sheet must be laid before the acoustic underlay. Without a barrier, moisture rises, swells the flooring from underneath, and within 6-12 months, undulations appear that can no longer be removed. We check the flatness, humidity, and level of the subfloor before proposing the type of flooring.

Of course. Quality plastics, masking tape, foam board depending on the surface. Everything clean and vacuumed at the end. The choice between different types of wood or wood-effect flooring depends on three main factors: budget, intended use, and desired aesthetics. AC4 laminate floating flooring, which is what we sell most today, offers a very good quality-price ratio with resistance to intensive use. It consists of a top melamine layer with a realistic wood effect (high durability against abrasion), a high-density fibreboard core, and a balancing bottom layer. The top layer has an AC4 classification (suitable for intensive domestic use or moderate commercial use) and resists 25,000 abrasive cycles without visible wear. For standard domestic use, it lasts 15-25 years with a good appearance. Its drawback is that although visually very realistic, it is not natural wood and cannot be sanded and re-varnished if damaged at any point. Flooring with an official manufacturer's warranty (10-25 years) plus our installation coverage.

The price for furniture restoration in Santa Coloma de Gramenet typically ranges between 95 and 1240 euros. The final figure depends on the property's condition, materials, and labour time. We always provide a fixed quote before starting. Call us, message us on WhatsApp, or request your quote online — we'll respond within 10 minutes during business hours. Call us, message us on WhatsApp, or request your quote online — we'll respond within 10 minutes during business hours.