Call us, message us on WhatsApp, or request your quote online — we will respond in less than 10 minutes during business hours. Not for single pictures. Yes, for heavy supports or large compositions to confirm feasibility and provide a fixed quote. It depends on the model and complexity. A simple bookcase is more economical than a three-section wardrobe. We provide a fixed quote after examining the furniture.

The optimal screen centre height is 1.10-1.20 metres from the floor when viewed from a sofa. For walkways or kitchens, 1.40-1.60 m. We measure this before marking. The second risk is damage to the wall. Anchoring a tall wardrobe to the wall without appropriate rawl plugs for the material can tear away plaster or brick when someone pulls a drawer. There are specific rawl plugs for each material (concrete, brick, plasterboard, tiles). Using the same generic rawl plug for everything is a recipe for the furniture falling down weeks later. For complete IKEA, Leroy Merlin, or carpenter-made kitchens, the typical process involves several steps. A preliminary visit to measure and check the wall. Walls are never perfectly straight, and sometimes parts need to be adjusted to reality. Module assembly in the workshop when possible, to speed up the process. On-site installation with anchoring and levelling. Appliance connection, coordinated with the electrician and plumber if needed. Fine adjustment of doors and drawers. And plinth and trim installation.

For small pictures up to 2 kilograms, a picture hook or a nail is sufficient on most walls except tiles and plasterboard. For medium pictures from 2 to 8 kilograms, a specific rawl plug for the material with a 4-5 mm screw. For large pictures and mirrors up to 15 kilograms, a reinforced rawl plug and a 6 mm screw. For LCD TV mounts up to 50 inches and 25 kilograms actual weight (including mount weight), two anchoring points to profiles or pillars with an 8 mm screw. Perforated brick is the most common material in internal partition walls and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the rawl plug can fall into the internal cavity of the brick if it enters between two walls. To prevent this, we use special rawl plugs that expand inside the void. For medium loads, this works well. For heavy loads, it is better to find the nearest pillar. Plasterboard (laminated gypsum board) is the modern material for ceilings and partitions in recent constructions. It is very fragile without the correct rawl plug. For light loads up to 5 kilograms, a toggle nail is sufficient. For medium loads, there are metal plasterboard rawl plugs like Molly-type anchors that expand behind the board. For heavy loads, such as a large TV, it is necessary to locate the metal support profiles behind the plasterboard with a detector and screw into the profile.

The price of repairs in Provençals del Poblenou usually ranges between 162 and 2025 euros. The final amount depends on the condition of the property, the materials, and the working time. We always provide a fixed quote before starting. If the fixing fails, we return to reinforce it at no extra cost. Rawl plugs are calculated with a safety margin. Approximately 60-90 minutes including layout, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch.