Not for single pictures. Yes, for heavy supports or large compositions to confirm feasibility and provide a fixed quote. Call us, message us on WhatsApp, or request your quote online — we'll respond within 10 minutes during business hours. For larger tasks (post-season preparation, house moves, assembly of a complete IKEA kitchen or living room), we plan the visit in advance and provide a fixed quote for the entire job.

The optimal screen centre height is 1.10-1.20 metres from the floor when viewed from a sofa. For walkways or kitchens, 1.40-1.60 m. We measure this before marking. There's a category of household jobs that aren't strictly plumbing, electrical, or carpentry. These are the things that have been on your to-do list for months and could be resolved in an afternoon if you had the tools and the inclination. The picture that needs hanging. The door that sticks. The IKEA furniture that arrived two months ago and is still in its box. The upstairs bathroom tap that drips, but not enough to call a plumber just yet. Adjustment of doors and windows. Building movement, temperature changes, and humidity cause doors to scrape against the frame, windows not to close properly, or blinds to get stuck. Often the solution is a hinge adjustment or a localised sanding, a job taking less than an hour.

The first mistake is using a standard wall drill bit on tiles. The tip slips, and the tile cracks. A ceramic drill bit with a diamond tip must be used. The second mistake is using a hammer drill on tiles. The vibrations crack the tile from within, and fine cracks appear weeks later. Drilling must be done without percussive action. The third mistake is not marking the centre correctly. A pencil mark on masking tape around the spot prevents the drill bit from slipping. There are four common wall types in homes in the area, and each requires different techniques and materials. If the fixing is incorrect, the short-term result may seem acceptable. In the medium term, the weight of the picture or TV will overcome the material, and everything ends up on the floor. Perforated brick is the most common material for interior partitions and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the rawplug can fall into the inner cavity of the brick if it enters between two walls. To avoid this, we use special rawplugs that open up inside the void. It works well for medium loads. For heavy loads, it's better to find the nearest pillar.

The price of repairs in Pubilla Cases typically ranges between 162 and 2025 euros. The final figure depends on the condition of the property, the materials, and the working time. We always provide a fixed quote before starting. Approximately 60-90 minutes, including composition, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch. If the fixing gives way, we return at no cost to reinforce it. Rawplugs are calculated with a safety margin.