Call us, write to us on WhatsApp, or request your online quote — we'll respond within 10 minutes during business hours. Not for single pictures. Yes for heavy supports or large compositions to confirm feasibility and provide a fixed quote. Call us, write to us on WhatsApp, or request your online quote — we'll respond within 10 minutes during business hours.

The optimal screen centre height is 1.10-1.20 metres from the floor when viewing from a sofa. For walkways or kitchens, 1.40-1.60 m. We measure this before marking. The second risk is wall damage. Anchoring a tall cabinet to the wall without appropriate plugs for the material can tear out plaster or brick when someone pulls on a drawer. For each material (concrete, brick, plasterboard, tile) there are specific plugs. Using the same generic plug for everything is a recipe for the furniture to fall weeks later. For complete IKEA, Leroy Merlin, or carpenter-made kitchens, the typical process involves several steps. A preliminary visit to measure and check the wall. Walls are never perfectly straight, and sometimes pieces need to be adjusted to fit reality. Assembly of modules in the workshop when possible, to speed up. On-site installation with anchoring and levelling. Connection of appliances, coordinated with an electrician and plumber if needed. Fine adjustment of doors and drawers. And installation of plinths and trims.

The first mistake is using a standard wall drill bit on tiles. The tip slips and cracks the tile. You need to use a ceramic drill bit with a diamond tip. The second mistake is using a hammer drill on tiles. The vibrations crack the tile from within, and fine cracks appear weeks later. You need to drill without percussion. The third mistake is not marking the centre properly. A pencil mark on masking tape around the point prevents the drill bit from slipping. Perforated brick is the most common material for interior partitions and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the wall plug can fall into the inner cavity of the brick if it enters between two walls. To avoid this, we use special plugs that expand inside the cavity. For medium loads, it works well. For heavy loads, it's better to find the nearest pillar. Plasterboard (laminated gypsum board) is the modern material for ceilings and partitions in recent constructions. It is very fragile without the correct plug. For light loads up to 5 kg, a toggle anchor is sufficient. For medium loads, there are metal plasterboard plugs like Molly bolts that expand behind the board. For heavy loads like a large TV, you need to locate the supporting metal framework behind the plasterboard with a detector and screw into the profile.

The price for repairs in El Baix Guinardó typically ranges between 162 and 2025 euros. The final figure depends on the condition of the property, the materials, and the working time. We always provide a fixed quote before starting. Approximately 60-90 minutes including layout, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch. If the fixing gives way, we return free of charge to reinforce it. Plugs are calculated with a safety margin.