We clean carpets and upholstery in Porta. We visit your home, assess the job, give you a clear price, and start. Improperly installed articulated mounts are the primary cause of falling TVs in homes. The articulated arm amplifies the lever effect when the TV tilts or swivels. If the wall mount is marginal, the actual weight exerted on the fixing can triple at full extension. That's why we always look for metal studs behind plasterboard or concrete pillars. We never mount an articulated arm solely to plasterboard or hollow bricks.
Not for individual pictures. Yes for heavy mounts or large arrangements to confirm feasibility and provide a fixed quote. Call us, text us on WhatsApp, or request your quote online – we'll respond in under 10 minutes during business hours. Call us, text us on WhatsApp, or request your quote online – we'll respond in under 10 minutes during business hours.
The optimal screen centre height is 1.10-1.20 metres from the floor when viewed while seated on a sofa. For high-traffic areas or kitchens, 1.40-1.60 m. We measure this before marking. The quote is based on the size of the area, the current condition, and the necessary products. We'll send it to you in writing before starting, and no extra charges will be added unless hidden damage is found, in which case we will seek your authorization before proceeding. Yes, we offer Saturday availability and emergency service on Sundays for issues that cannot wait, such as major leaks or equipment downtime during peak season. Services performed carry the same 30-day guarantee as other services.
For small pictures up to 2 kilos, a picture hook or a nail is sufficient for most walls except tile and plasterboard. For medium-sized pictures from 2 to 8 kilos, use a specific wall plug for the material with a 4-5 mm screw. For large pictures and mirrors up to 15 kilos, use a reinforced wall plug and a 6 mm screw. For LCD TV mounts up to 50 inches and a real weight of 25 kilos (including the mount's weight), use two fixing points on studs or a pillar with an 8 mm screw. The first mistake is using a standard wall drill bit on tiles. The bit slips, and the tile cracks. You need to use a ceramic drill bit with a diamond tip. The second mistake is using a hammer drill on tiles. The vibrations crack the tile from the inside, leading to fine cracks appearing weeks later. You must drill without the hammer function. The third mistake is not marking the centre properly. A pencil mark on masking tape around the spot prevents the drill bit from slipping. Hollow bricks are the most common material in interior partition walls and non-load-bearing walls. They are reasonably easy to drill, but the problem is that the wall plug can fall into the internal cavity of the brick if it gets between two walls. To prevent this, we use special plugs that expand inside the void. It works well for medium loads. For heavy loads, it's better to locate the nearest pillar.
The price for carpets and upholstery in Porta typically ranges between €70 and €455. The final amount depends on the property's condition, materials, and working time. We always provide a fixed quote before starting. Approximately 60-90 minutes including arrangement, marking, drilling, fixing, and cleaning. We provide a fixed cost for the entire job. If the fixture fails, we return to reinforce it at no cost. Wall plugs are calculated with a safety margin.
Service data
Operational info based on our activity in the area, reviewed by a senior pro and referenced with official sources.
Request a quote for carpets and upholstery in Porta. We'll respond today, and if it suits, we can visit this week.
Hot-water extraction. Coverage in Porta (Barcelonès). Bloques densos junto a Sant Andreu.
Local team, registered and insured. We give you a fixed written quote before starting — no surprises or hidden fees.
Indicative price. We give the fixed price after reviewing your photos or —if you prefer— a visit, no commitment.
