Call us, message us on WhatsApp, or request your quote online — we'll respond in less than 10 minutes during business hours. Changing from a standard switch to a dimmer switch first requires checking that the light fixture is compatible. Standard LED bulbs are often not dimmable. Only LEDs labelled as 'dimmable' work well with dimmers. Old halogen lights do dim without issue but are rarely used now due to consumption. To add a new socket where there was nothing before, there are two approaches. The first is chasing. Opening a channel in the wall from the nearest socket to the new point, running the cable inside, and closing the channel with plaster. This is the cleanest visually but involves minor construction work and repainting the wall. Timeline: 4-6 hours plus wall repair.

A much sought-after improvement today is combining a motorised blind with a roller fly screen integrated into the same box. This allows both the blind and the fly screen to operate independently, both hidden when not in use. It is the standard solution in modern new builds. For existing home renovations, it requires replacing the entire box with a new, deeper one that houses both systems. Changing the tape itself is a 30-45 minute operation per blind when the box is accessible. The real complexity lies in locating the internal break, opening the box without damaging it, removing the axle, removing the old tape, threading the new tape through the slats and the winder. Reassembling the entire unit without misaligning the slats. For someone who has never done it, one blind can take three hours and end up worse than before. For technicians who do it daily, it's a 30-minute job with a clean result. Motorisation requires electrical power to the top box. If the wall near the box already has an electrical cable nearby (typically from a nearby room socket), installation is straightforward. If not, a cable must be run through an external conduit or a hidden channel. The complete motorisation operation takes 2-3 hours per blind when there is nearby power. For all blinds in an entire house, we can do it in 1-2 days.

If the blind slats are cracked, discoloured, and brittle (typical for blinds over 25-30 years old exposed to direct sunlight), repairing them point by point is no longer economically sensible. Replacing the entire blind with a modern model costs two to three times more than just changing the tape. In return, it gives you another 25-30 years of trouble-free use. Modern slats are injected and filled with polyurethane, much better insulating than the old hollow ones, thus improving thermal insulation. And you can order integrated motorisation from the factory. Official manufacturer's warranty on the mechanism plus our labour coverage. Official manufacturer's warranty 3-5 years depending on the brand. Branded LEDs last 25,000 hours under normal conditions.

The price for TV aerials in Barcelona typically ranges between €61 and €900. The final figure depends on the property's condition, materials, and labour time. We always provide a fixed quote before starting. Call us, message us on WhatsApp, or request your quote online — we'll respond in less than 10 minutes during business hours. Call us, message us on WhatsApp, or request your quote online — we'll respond in less than 10 minutes during business hours.