Call us, message us on WhatsApp, or request your quote online – we'll reply in under 10 minutes during business hours. We start with ceilings, light fittings, air ducts, and the tops of wardrobes, where the finest dust accumulates. We then move on to walls, doors, frames, skirting boards, radiators, and blind tracks. Next, interior and exterior woodwork, windows inside and out, taps, and sanitaryware. We finish with the floors, which are done last because they receive everything that falls during the process. Thorough vacuuming, mopping with a neutral cleaner, and, if necessary, a second mop to remove the last traces of construction dust. For high-traffic areas (entrances, hallways, continuously used stairs), we recommend not using laminate flooring as heavy use concentrated there deteriorates the top layer faster than in residential areas. For these areas, porcelain gres or natural stone last much longer.

Self-levelling compound or levelling screed, acoustic underlay, and moisture barrier. We check the flatness, moisture, and level of the subfloor before proposing a type of flooring. We install laminate flooring, parquet, and vinyl flooring, as well as sand and varnish old floors. We replace warped boards due to damp and damaged skirting boards to leave the floor uniform.

No, we choose the product compatible with each material (gres, marble, microcement, parquet) after a prior assessment. This is precisely what prevents scratching or dulling new surfaces. The choice between different types of wood or wood-effect flooring depends on three main factors: budget, intended use, and desired aesthetics. AC4 laminate floating flooring, which is what we sell most of today, combines excellent value for money with resistance to heavy use. It consists of a top layer of melamine with a realistic wood effect (high resistance to abrasion), a high-density fibreboard core, and a balancing layer underneath. The top layer is rated AC4 (suitable for heavy domestic or moderate commercial use) and withstands 25,000 abrasion cycles without visible wear. For standard domestic use, it lasts 15-25 years looking good. Its downside is that although visually very realistic, it's not natural wood and cannot be sanded and re-varnished if damaged in any area. Flooring with official manufacturer's warranty (10-25 years) plus our installation cover.

The price for skirting boards and mouldings in Navas typically ranges between €110 and €1940. The final figure depends on the property's condition, materials, and the time required. We always provide a fixed quote before starting. The result is a home ready to move into or hand over to a tenant or buyer, with no dust reappearing after two days and no residue on windows or taps. We carry out a free prior assessment to give you a fixed price based on the size and condition. Masonry work leaves more debris than a simple paint change. All work comes with a 30-day guarantee. Solid wood parquet is the traditional option. Each plank is 100 percent solid natural wood, typically oak, ash, or walnut. Much more expensive to buy and install, but it gives a unique character to the room as each plank has a distinct natural grain. Its great advantage is its indefinite durability. If it wears or gets damaged, it can be sanded and re-varnished several times throughout its life. This is what used to be installed in old high-end flats and what we recommend for premium home renovations where the budget allows.