Not for single pictures. Yes, for heavy mounts or large compositions to confirm feasibility and provide a fixed quote. Call us, message us on WhatsApp, or request your quote online — we respond within 10 minutes during business hours. Yes, the first mandatory step. If a part is missing, we stop and help you process the replacement with the store before continuing.

An improperly installed articulated mount is the primary cause of falling TVs in homes. The articulated arm multiplies the leverage effect when the TV tilts or rotates. If the wall anchor is marginal, the actual weight exerted on the fixing can triple at maximum extension. That's why we always look for metal profiles behind plasterboard or a concrete pillar. We never anchor an articulated arm only to plasterboard or cavity brick. When required by the model, secure wall anchoring with appropriate plugs for the material. IKEA is by far the most requested. Their furniture is reasonably well-designed, and the instructions are clear (though text-free, with universal drawings). Components fit precisely when assembled correctly. The most common mistake is overtightening the plastic cam screws, which break and require replacement. The correct technique is to tighten by hand until snug and then give only half a turn more with a screwdriver, not an electric one.

For small pictures up to 2 kg, a picture hook or nail is sufficient for most walls, except tiles and plasterboard. For medium pictures from 2 to 8 kg, a material-specific wall plug with a 4-5mm screw. For large pictures and mirrors up to 15 kg, a reinforced wall plug and a 6mm screw. For LCD TV mounts up to 50 inches and 25 kg actual weight (including mount weight), two anchoring points into a frame or pillar with an 8mm screw. The first mistake is using a standard wall drill bit on tiles. The tip slips, and the tile cracks. A ceramic drill bit with a diamond tip must be used. The second mistake is using a hammer drill on tiles. Vibrations crack the tile from the inside, and fine cracks appear weeks later. Drilling should be done without percussion. The third mistake is not marking the centre correctly. A pencil mark on masking tape around the point prevents the drill bit from slipping. It depends on the model and complexity. A simple bookcase is cheaper than a three-door wardrobe. We provide a fixed quote after seeing the furniture.

The cost of door adjustment in La Concòrdia typically ranges between €27 and €224. The final figure depends on the property's condition, materials, and working time. We always provide a fixed quote before starting. Approximately 60-90 minutes, including composition, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch. Yes, IKEA Metod, Leroy Merlin, or bespoke kitchens. A prior visit for a fixed quote and planning is mandatory.