Call us, message us on WhatsApp or request your quote online — we'll respond within 10 minutes during working hours. Yes, it's one of our main profiles. Communication via email and WhatsApp, 'before & after' photos, and digital invoicing. For homes left empty from October to March, the inspection also includes technical shutdown. We turn off water stopcocks if there's no risk of frost, which is rare on the coast. We bleed the water heater if the home is unused for more than three months. We empty air conditioning trays and turn them off. And we check smoke and carbon monoxide detectors, if present.

For non-resident owners and holiday rental managers, a pre-season review is the most cost-effective way to avoid emergencies during the critical summer months. An issue detected in May costs a tenth of what it would cost to solve with a client in residence in August. All technicians are overloaded. Poorly installed articulated mounts are the leading cause of fallen TVs in homes. The articulated arm multiplies the leverage effect when the TV tilts or rotates. If wall anchoring is marginal, the actual weight exerted on the mount can triple at maximum extension. That's why we always look for metal profiles behind plasterboard or concrete pillars. We never anchor an articulated arm solely to plasterboard or cavity brick. Optimal screen centre height is 1.10-1.20 metres from the floor when viewed from a seated position on a sofa. For walkways or kitchens, 1.40-1.60 m. We measure this before marking.

The first mistake is using a standard wall drill bit on tiles. The tip slips, and the tile cracks. You must use a ceramic drill bit with a diamond tip. The second mistake is using a hammer drill on tiles. Vibrations crack the tile from within, and fine cracks appear weeks later. You must drill without percussion. The third mistake is not marking the centre properly. A pencil mark on masking tape around the point prevents the drill bit from slipping. For small pictures up to 2 kilograms, a hook or a nail is sufficient for most walls, except tiles and plasterboard. For medium pictures from 2 to 8 kilograms, a specific rawlplug for the material with a 4-5 mm screw. For large pictures and mirrors up to 15 kilograms, a reinforced rawlplug and a 6 mm screw. For LCD TV mounts up to 50 inches and 25 kilograms of actual weight (including mount weight), two anchor points to profiling or a pillar with an 8 mm screw. Perforated brick is the most common material for interior partitions and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the rawlplug can fall into the inner cavity of the brick if it enters between two walls. To avoid this, we use special rawlplugs that expand inside the void. This works well for medium loads. For heavy loads, it's better to find the nearest pillar.

The price for adjusting doors in Progrés typically ranges between 27 and 224 euros. The final figure depends on the property's condition, materials, and work time. We always provide a fixed quote before starting. Yes, we offer an annual contract with two scheduled visits plus urgent response at a preferential rate for the rest of the year. The cost of scheduled maintenance is always lower than the accumulated cost of reactive emergencies. The data we collect from our own clients confirms this year after year.