Not for single pictures. Yes, for heavy mounts or large compositions to confirm feasibility and provide a fixed quote. Call us, message us on WhatsApp, or request your quote online — we respond in less than 10 minutes during business hours. All professionals undergo a verification process where we check their identity, previous experience, and public liability insurance. Furthermore, all interventions are backed by a 30-day guarantee.

A poorly installed articulated bracket is the primary cause of fallen TVs in homes. The articulated arm multiplies the leverage effect when the TV tilts or swivels. If the wall anchor is marginal, the actual weight exerted on the fixing can triple when fully extended. This is why we always look for metal studs behind plasterboard or a concrete pillar. We never anchor an articulated arm solely to plasterboard or cavity brick. IKEA is by far the most requested. Their furniture is reasonably well-designed, and the instructions are clear (though without text, using universal drawings). Components fit precisely when assembled correctly. The most common error is overtightening the plastic cam screws, causing them to break and require replacement. The correct technique is to hand-tighten until it stops and then only give it half an extra turn with a screwdriver, not an electric one. When the model requires it, secure wall anchoring with appropriate wall plugs for the material.

For small pictures up to 2 kilos, a picture hook or a nail is sufficient for most walls except tiles and plasterboard. For medium pictures from 2 to 8 kilos, a specific wall plug for the material with a 4-5 mm screw. For large pictures and mirrors up to 15 kilos, a reinforced wall plug and a 6 mm screw. For LCD TV mounts up to 50 inches and a real weight of 25 kilos including the mount's weight, two anchor points to metal studs or a pillar with an 8 mm screw. Plasterboard (laminated gypsum board) is the modern material for ceilings and partitions in recent constructions. It is very fragile without the correct wall plug. For light loads up to 5 kilos, a toggle anchor is sufficient. For medium loads, there are metal plasterboard anchors like Molly bolts that expand behind the board. For heavy loads like large TVs, the metal support studs behind the plasterboard must be located with a detector, and the screw driven into the stud. Perforated brick is the most common material for interior walls and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the wall plug can fall into the internal cavity of the brick if it enters between two walls. To avoid this, we use special wall plugs that open within the cavity. It works well for medium loads. For heavy loads, it's better to find the nearest pillar.

The price for repairs in Pomar usually ranges between €162 and €2025. The final figure depends on the property's condition, materials, and working time. We always provide a fixed quote before starting. If the fixing fails, we will return free of charge to reinforce it. Wall plugs are calculated with a safety margin. Approximately 60-90 minutes, including composition, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch.