Call us, send a message via WhatsApp, or request your quote online — we respond within 10 minutes during business hours. Not for single pictures. Yes, for heavy mounts or large compositions to confirm feasibility and provide a fixed quote. Yes, this is a mandatory first step. If a piece is missing, we will stop and help you process the replacement with the store before continuing.

A poorly installed articulated bracket is the primary cause of fallen TVs in homes. The articulated arm multiplies the leverage effect when the TV is tilted or rotated. If the wall anchor is marginal, the actual weight exerted on the fixing can triple at maximum extension. This is why we always look for metal profiles behind plasterboard or concrete pillars. We never anchor an articulated arm solely to plasterboard or hollow brick. For complete IKEA, Leroy Merlin, or joiner-built kitchens, the typical process involves several steps. A preliminary visit to measure and check the wall. Walls are never perfectly straight, and sometimes parts need to be adjusted to reality. Modules are assembled in the workshop when possible to speed things up. On-site installation with anchoring and levelling. Connection of appliances, coordinated with an electrician and plumber if needed. Fine adjustment of doors and drawers. And fitting of plinths and trims. The second risk is damage to the wall. Anchoring a tall cabinet to the wall without appropriate wall plugs for the material can tear out plaster or brick when someone pulls on a drawer. For each material (concrete, brick, plasterboard, tile), there are specific wall plugs. Using the same generic wall plug for everything is a recipe for the furniture to fall weeks later.

For small pictures up to 2 kg, a picture hook or nail is sufficient for most walls, except tile and plasterboard. For medium pictures from 2 to 8 kg, use a material-specific wall plug with a 4-5 mm screw. For large pictures and mirrors up to 15 kg, a reinforced wall plug and a 6 mm screw. For LCD TV mounts up to 50 inches and a real weight of 25 kg (including the mount's weight), two anchor points to metal framing or a pillar with an 8 mm screw. Plasterboard (laminated gypsum board) is the modern material for ceilings and partitions in recent constructions. It is very fragile without the correct wall plug. For light loads up to 5 kg, a toggle anchor nail is sufficient. For medium loads, there are metallic plasterboard anchors (Molly type) that expand behind the board. For heavy loads, such as large TVs, the supporting metal framing behind the plasterboard must be located with a detector, and the screw driven into the profile. Perforated brick is the most common material for internal partitions and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the wall plug can fall into the inner cavity of the brick if it enters between two walls. To prevent this, we use special wall plugs that open within the cavity. For medium loads, this works well. For heavy loads, it is better to find the nearest pillar.

The price for repairs in Canyadó typically ranges between €162 and €2025. The final figure depends on the property's condition, materials, and working time. We always provide a fixed quote before starting. If the fixing fails, we return to reinforce it at no extra cost. Wall plugs are calculated with a safety margin. Approximately 60-90 minutes, including composition, marking, drilling, fixing, and cleaning. We provide a fixed cost for the lot.