Not for single pictures. Yes, for heavy mounts or large compositions to confirm feasibility and provide a fixed quote. Call us, message us on WhatsApp, or request your quote online — we'll respond within 10 minutes during business hours. Call us, message us on WhatsApp, or request your quote online — we'll respond within 10 minutes during business hours.

A poorly installed articulated bracket is the primary cause of falling TVs in homes. The articulated arm multiplies the leverage effect when the TV tilts or swivels. If the wall anchor is borderline, the actual weight exerted on the fixing can triple at maximum extension. That's why we always look for metal profiles behind plasterboard or concrete pillars. We never anchor an articulated arm into plasterboard or cavity brickwork alone. IKEA is by far the most requested. Their furniture is reasonably well-designed, and the instructions are clear (though text-free, with universal diagrams). Components fit precisely when assembled correctly. The most common mistake is overtightening the plastic cam screws, which break and need replacing. The correct technique is to tighten by hand until snug and then give just half a turn more with a screwdriver, not an electric one. When required by the model, secure wall anchoring with appropriate plugs for the material.

The first mistake is using a standard wall drill bit on tiles. The tip slips, and the tile cracks. A ceramic drill bit with a diamond tip must be used. The second mistake is using a hammer drill on tiles. Vibrations crack the tile from within, and fine cracks appear weeks later. Drilling must be done without impact. The third mistake is not marking the centre properly. A pencil mark on masking tape around the point prevents the drill bit from skidding. Plasterboard (laminated plasterboard) is the modern material for ceilings and recent partition walls. It is very fragile without the correct plug. For light loads up to 5 kilos, a toggle nail is sufficient. For medium loads, there are metallic plasterboard anchors like Molly plugs that expand behind the board. For heavy loads like large TVs, the supporting metal framework behind the plasterboard must be located with a detector and screwed to the profile. Perforated brick is the most common material for interior partition walls and non-load-bearing walls. It is reasonably easy to drill, but the problem is that the plug can fall into the inner cavity of the brick if it enters between two walls. To avoid this, we use special plugs that open within the void. For medium loads, it works well. For heavy loads, it's better to find the nearest pillar.

The price for repairs in Bufalà usually ranges between 162 and 2025 euros. The final figure depends on the property's condition, materials, and working time. We always provide a fixed quote before starting. Approximately 60-90 minutes, including composition, marking, drilling, fixing, and cleaning. We provide a fixed cost for the batch. If the fixing fails, we'll return to reinforce it at no extra cost. Plugs are calculated with a safety margin.