How we work
The most critical step is preparing the subfloor. Floating laminate flooring requires a subfloor with a maximum deviation of 3 mm over a 2-metre straight edge. If the subfloor has larger deviations, it must be levelled with self-levelling screed before starting. Without this levelling, the tongue-and-groove joints will gradually separate, and visible gaps will appear between planks after a few months of use. For areas of very intensive use (entrances, hallways, high-traffic stairs), we do not recommend floating laminate flooring because its concentrated heavy use deteriorates the top layer faster than in residential areas. For these areas, porcelain gres or natural stone last much longer. The choice between different types of wood or wood-effect flooring depends on three main factors: budget, intended use, and desired aesthetic. AC4 laminate floating flooring, which is what we sell most of today, combines very good value for money with resistance to intensive use. It consists of a top melamine layer with a realistic wood effect (high resistance to abrasion), a high-density fibreboard core, and a balancing layer at the bottom. The top layer has an AC4 rating (suitable for intensive domestic use or moderate commercial use) and can withstand 25,000 abrasive cycles without visible wear. For standard domestic use, it lasts 15-25 years maintaining its appearance. Its drawback is that although visually very realistic, it is not natural wood and cannot be sanded and varnished again if damaged.
