Call us, message us on WhatsApp, or request your quote online — we'll reply in under 10 minutes during working hours. We start with ceilings, light fittings, air ducts, and the tops of wardrobes, where the finest dust accumulates. We then move on to walls, doors, frames, skirting boards, radiators, and blind/shutter tracks. Next, interior and exterior carpentry, windows inside and out, taps, and sanitaryware. We finish with the floors, which are done last because they receive everything that falls during the process. Thorough vacuuming, mopping with a neutral cleaner, and, if necessary, a second mop to remove the last traces of construction dust. The most critical step is surface preparation. Floating flooring requires a subfloor with a maximum deviation of 3mm over a 2-metre straight edge. If the subfloor has larger deviations, it must be levelled with self-levelling compound before starting. Without this levelling, the tongue-and-groove joints will progressively separate, and visible gaps will appear between planks after a few months of use.

We check the flatness, moisture, and level of the subfloor before recommending a type of flooring. Self-levelling compound or levelling sheet, acoustic underlay, and moisture barrier. We install laminate flooring, parquet, and vinyl flooring, as well as sanding and varnishing old floors. We replace swollen planks caused by damp and damaged skirting boards to leave the floor uniform.

No, we choose the product compatible with each material (stoneware, marble, microcement, parquet) after a prior assessment. This is precisely what prevents scratching or dulling new surfaces. The choice between different types of wood or wood-effect flooring depends on three main factors: budget, intended use, and desired aesthetics. AC4 laminate floating flooring, which is what we sell most of today, offers a very good quality-price ratio and resistance to intensive use. It consists of a top melamine layer with a realistic wood effect (high resistance to abrasion), a high-density fibreboard core, and a balancing layer underneath. The top layer has AC4 classification (suitable for intensive domestic use or moderate commercial use) and can withstand 25,000 abrasive cycles without visible wear. For standard domestic use, it lasts 15-25 years looking good. Its drawback is that although visually very realistic, it is not natural wood and cannot be sanded and re-varnished if damaged at any point. Flooring with official manufacturer warranty (10-25 years) plus our installation coverage.

The price for skirting boards and mouldings in La Clota typically ranges between €110 and €1940. The final amount depends on the property's condition, materials, and labour time. We always provide a fixed quote before starting. The result is a home ready to move into or to hand over to a tenant or buyer, with no dust reappearing after two days and no residue on windows or taps. We carry out a free prior assessment to give you a fixed price based on the area and condition. Masonry work leaves more debris than a simple paint job. All work comes with a 30-day guarantee. Solid wood parquet is the traditional option. Each plank is 100 percent solid natural wood, typically oak, ash, or walnut. Much more expensive to buy and install, but it gives the room a unique character as each plank has a different natural grain. Its great advantage is its indefinite durability. If it wears or gets damaged, it can be sanded and re-varnished several times throughout its life. This is what was used in old high-end flats and what we recommend for premium home renovations where the budget allows.